These DTF (direct to film) transfers can be pressed onto the fabric of your choice, whether that be a Tri-blend jersey or a bamboo French Terry. Printed by Do Or Dye.
All measurements are approximate and listed length x height for each item.
We are not liable for any mistakes that may happen once received on your end, nor can we possibly know everything about each individual’s equipment. We will, of course, take responsibility for any potential printing issues.
Manufacturer's instructions:
Pre-press item to remove moisture.
Place transfer on item. Recommend securing placement with heat transfer tape.
Press item with medium pressure (60-90 psi).
Allow item to cool completely before peeling the film.
Press again with a finishing sheet, such as a teflon sheet or T-Seal Finishing Sheet for transfers.
Temperature and time recommendations:
Polyester: 275
°F for 10 seconds
Tri-blends: 280°F for 10 seconds
Poly 50/50 blends: 300°F for 12 seconds
100% cotton/natural fiber: 325°F for 14 seconds
You MAY press the item again if it doesn't lift off cleanly the first time, just make sure nothing shifted.
